不锈钢面板与铝面板泡沫铝夹芯梁的抗爆性能

为考查泡沫铝夹芯梁的抗爆性能及面板材料对其抗爆性能的影响，采用数值模拟方法分析了面板材料分别为工业纯铝与304号不锈钢，芯材为Alporas泡沫铝共同组成相同质量泡沫铝夹芯梁在不同爆炸荷载作用下的跨中位移与芯材压缩应变的差异。研究结果显示：在爆炸冲量分别为1．82，3．77，6．08，7．0kN·s的作用下，工业纯铝面板泡沫铝夹芯梁跨中位移分别为304号不锈钢面板泡沫铝夹芯梁跨中位移的68％，83％，84％及86％，较304号不锈钢面板泡沫铝夹芯梁具有更好地抵抗爆炸冲击波的能力，面板材料对泡沫铝夹芯梁的压缩应变影响较小。     

弹道导弹威胁估计模型构建

简要分析了弹道导弹飞行3个阶段的不同特点及各阶段导弹预警探测手段的侧重点,结合威胁估计的特征构建了弹道导弹威胁估计模型结构框架,运用多阶段贝叶斯网络理论,构造了主动段、自由段和再入段威胁估计模型,并明确了三阶段间的转换时机。采用动态贝叶斯方法对弹道导弹作战全过程进行威胁估计仿真推理,仿真结果能够反映导弹在飞行过程中威胁程度的变化特点,为反导指挥员作出辅助决策提供智力支持。     

高动态GNSS信号多普勒模拟任意阶直接数字合成器设计

为高精度模拟高动态条件下GNSS信号的多普勒特性,提出一种任意阶直接数字合成信号合成器的设计方法。设计任意阶直接数字合成信号合成器的结构;通过理论分析,推导各级累加器相位初值的计算公式;给出字长选择方法。经仿真验证,该方法能精确模拟GNSS信号的多普勒特性。此外,提出的直接数字合成器设计方法不受阶数的限制,可普遍应用于各类信号模拟器的设计。     

On efficient algorithms for finding efficient salvo policies

We consider the salvo policy problem, in which there are k moments, called salvos, at which we can fire multiple missiles simultaneously at an incoming object. Each salvo is characterized by a probability p_i: the hit probability of a single missile. After each salvo, we can assess whether the incoming object is still active. If it is, we fire the missiles assigned to the next salvo. In the salvo policy problem, the goal is to assign at most n missiles to salvos in order to minimize the expected number of missiles used. We consider three problem versions. In Gould's version, we have to assign all n missiles to salvos. In the Big Bomb version, a cost of B is incurred when all salvo's are unsuccessful. Finally, we consider the Quota version in which the kill probability should exceed some quota Q. We discuss the computational complexity and the approximability of these problem versions. In particular, we show that Gould's version and the Big Bomb version admit pseudopolynomial time exact algorithms and fully polynomial time approximation schemes. We also present an iterative approximation algorithm for the Quota version, and show that a related problem is NP-complete.     

Technical note: Finite-time regret analysis of Kiefer-Wolfowitz stochastic approximation algorithm and nonparametric multi-product dynamic pricing with unknown demand

We consider the problem of nonparametric multi-product dynamic pricing with unknown demand and show that the problem may be formulated as an online model-free stochastic program, which can be solved by the classical Kiefer-Wolfowitz stochastic approximation (KWSA) algorithm. We prove that the expected cumulative regret of the KWSA algorithm is bounded above by where κ₁, κ₂ are positive constants and T is the number of periods for any T = 1, 2, … . Therefore, the regret of the KWSA algorithm grows in the order of , which achieves the lower bounds known for parametric dynamic pricing problems and shows that the nonparametric problems are not necessarily more difficult to solve than the parametric ones. Numerical experiments further demonstrate the effectiveness and efficiency of our proposed KW pricing policy by comparing with some pricing policies in the literature.     

分形理论在装备保障组织设计中的应用研究

基于分形理论，提出了一种适应敏捷化要求的分形装备保障系统组织模型，能够通过快速的重构以响应战场环境的变化。阐明了其层次性、自相似、自组织和自优化的组织结构特点，分析了其运行模式。     

自由漂浮柔性机械臂系统的动力学建模与仿真

动量矩守恒约束使自由漂浮柔性机械臂系统成为非完整系统,其动力学模型通常是难以求解的微分—代数方程,因此提出将机械臂系统等效为一个完整系统进行建模。假设载体存在姿态控制力矩,此时由于不存在动量矩守恒约束,系统变成一个完整系统,采用Lagrange方法建立其动力学方程;令方程中载体的姿态控制力矩为零,即得到自由漂浮机械臂系统的动力学方程;采用数值方法求解动力学方程,并将动力学分析的结果与ADAMS中仿真的结果进行对比,验证了模型能够有效模拟自由漂浮柔性机械臂系统的动力学特性。     

掠飞末敏弹耦合运动动导数计算

以新型掠飞末敏弹为研究对象,提出了基于欧拉转动定理和滑移网格技术的复杂角运动模拟方法,利用著名的罗德里格斯转换矩阵插值求得弹箭在每个时间步的角速度修正值,并指定给球形滑移网格区。通过对非定常气动参数进行求解辨识,分析了不同马赫数下掠飞末敏弹滚转运动对其俯仰组合动导数和升力系数动导数的影响规律。结果表明:所提角运动模拟方法可有效消除姿态角计算的累积误差,实现对弹箭任意给定角运动的准确模拟;弹箭滚转运动对俯仰组合导数和升力系数动导数的辨识结果均存在显著影响,在进行弹箭动导数计算和稳定性分析时需充分考虑俯仰耦合效应的影响。     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。